CONTACT PHONE 07914 914888
ADDRESS

Tylands Farm
Uckfield, TN22 3HB

1

First we thoroughly clean and de-grease the article to be sprayed. The we apply the primer to seal any cracks or imperfections on the surface

2

Next the basecoat is applied evenly across the surface before heating to 60ºC. The spray is then applied and left over night before a further cure at 60ºC for 1 hour.

3

First we thoroughly clean and de-grease the article to be spread. The we apply the primer to seal any cracks or imperfections on the surface

4

After the pre-activator, the activator is applied.

5

The chrome is then sprayed with the dual head spray gun. Once everything is evenly coated, we wash with water and then re-work until we have a deep chrome lustre.

6

We then spray with antioxide to protect the surface and prevent oxidation and UV degradation.

7

Lastly, a blast of air is used to remove all of the rinse water which may contain traces of chemicals that could create a burn. We then blow making sure all the water is removed.

8

Once all of the parts are chromed and baked, they receive a clear topcoat which various tints can be applied to.